DF nem tesztelt FX-9590-nel? Azzal lehetne egy jobb FX-8xxx OC-t szimulálni, bár lehet még 4.7-nél is lehet a gyári feszültség alá menni.
Btw modulos jószágok, A10-7870K-t elég komolyan lehet önmérsékletre bírni fogyasztás tekintetében The Stilt mérései szerint :]

Stock vs. Tuned voltages:

Pb0 (4100MHz) = 1.43750V vs. 1.1960V
P0 (3900MHz) = 1.38750V vs. 1.1530V
P1 (3800MHz) = 1.35000V vs. 1.1180V
P2 (3700MHz) = 1.30000V vs. 1.0960V
P3 (3500MHz) = 1.23750V vs. 1.0640V
P4 (3000MHz) = 1.08750V vs. 0.9630V
xx
xx

GNB (CNB + GNB) during 3D = 1.27500V vs. 1.0480V

Test: 3DMark11 Performance

Stock PMax VDD_CR DCR = 52.125W
Stock PMax VDDNB_CR DCR = 47.6875W
Total = 99.8125W

UV PMax VDD_CR DCR = 36.250W (-30.46%)
UV PMax VDDNB_CR DCR = 35.625W (-25.3%)
Total = 71.875W (-28%)

Test: 3DMark Sky Diver

Stock PMax VDD_CR DCR = 55.125W
Stock PMax VDDNB_CR DCR = 48.625W
Total = 103.75W

UV PMax VDD_CR DCR = 36.8125W (-33.21%)
UV PMax VDDNB_CR DCR = 37.1875W (-23.52%)
Total = 74.0W (-28.7%)

Test: 3DMark Fire Strike

Stock PMax VDD_CR DCR = 47.750W
Stock PMax VDDNB_CR DCR = 46.760W
Total = 94.51W

UV PMax VDD_CR DCR = 32.3125W (-32.33%)
UV PMax VDDNB_CR DCR = 35.000W (-25.15%)
Total = 67.3125W (-28.8%)

Test: Cinebench R15

Stock PMax VDD_CR DCR = 61.0625W

UV Pmax VDD_CR DCR = 35.6875W (-41.6%)

3DMark FS = 1752
3DMark SD = 6580
3DMark11 = P3231
Cinebench R15 = 94 (ST) / 324 (MT)

Everything else at stock but MEMCLK at 2400MHz.

Tested on 15.3 WHQL drivers (internal) which give a slight boost for Godavari in 3DMark11.