Linux kezdőknek - LOGOUT Hozzászólások

Legfrissebb anyagok

LOGOUT témák

PROHARDVER! témák

Mobilarena témák

IT café témák

GAMEPOD témák

Téma összefoglaló

Utoljára frissítve: 2023-12-13 05:03

LOGOUT

Linux kezdőknek - érdemes beleolvasni, mielőtt kérdezel

Új hozzászólás Aktív témák

#26853 mzx senior tag

Új Válasz 2014-06-03 17:10:11 #26853
Új hozzászólás
Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
Privát üzenet küldése

mzx

senior tag

Mégiscsak ment magától a (dhcp) net, linux live cd-n. Köszi, Pirk.
Megvan a SMART teszt végre, a kérdéses hdd-re:
Biztos ami biztos, a Pentium 3 -ból kivettem a jó hdd-t, és csak a tesztelendő (atyá)t hagytam benne, illetve át kellett jumperenem, meg átPATÁznom (a lovin lennék ilyen ügyes ), hogy a BIOS rápislogjon, mondván: létezik.
Most fut az offline teszt. Légyszi valaki árulja el, hogyan lehet megnézni az eredményét? Mindjárt végez vele. Erre gondolok:
smartctl -t offline /dev/sda
Ahogy nézem,"csak" az ERROR LOG jelez hibát. 37 celsius, egyelőre nem meleg, később megnézem még a hőmérsékletét.
Ki milyen gondot lát a teszt eredményből? Köszönettel várom az elemzéseket.
********************************
A TESZT EREDMÉNYE:
ubuntu@ubuntu:~$ sudo smartctl -i /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST340014A
Serial Number: {MAGÁNÜGY}
Firmware Version: 3.06
User Capacity: 40.020.664.320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Jun 3 14:24:04 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
__________________________
ubuntu@ubuntu:~$ sudo smartctl -c /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.
__________________________
ubuntu@ubuntu:~$ sudo smartctl -H /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
__________________________
ubuntu@ubuntu:~$ sudo smartctl -A /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 060 054 006 Pre-fail Always - 222860900
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 186566041
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 21881
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4191
194 Temperature_Celsius 0x0022 037 047 000 Old_age Always - 37
195 Hardware_ECC_Recovered 0x001a 060 054 000 Old_age Always - 222860900
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 9
199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 24
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 080 233 000 Old_age Always - 20
__________________________
ubuntu@ubuntu:~$ sudo smartctl -l error /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 362 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 362 occurred at disk power-on lifetime: 21851 hours (910 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f2 68 ec f2 Error: UNC 8 sectors at LBA = 0x02ec68f2 = 49047794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f2 68 ec f2 00 00:07:19.051 READ DMA
ec 00 00 00 00 00 b0 02 00:07:19.043 IDENTIFY DEVICE
ef 03 42 00 00 00 b0 02 00:07:19.035 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 b0 02 00:07:19.021 IDENTIFY DEVICE
c8 00 08 f2 68 ec f2 00 00:07:15.265 READ DMA
Error 361 occurred at disk power-on lifetime: 21851 hours (910 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f2 68 ec f2 Error: UNC 8 sectors at LBA = 0x02ec68f2 = 49047794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f2 68 ec f2 00 00:07:19.051 READ DMA
ec 00 00 00 00 00 b0 02 00:07:19.043 IDENTIFY DEVICE
ef 03 42 00 00 00 b0 02 00:07:19.035 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 b0 02 00:07:19.021 IDENTIFY DEVICE
c8 00 08 f2 68 ec f2 00 00:07:15.265 READ DMA
Error 360 occurred at disk power-on lifetime: 21851 hours (910 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f2 68 ec f2 Error: UNC 8 sectors at LBA = 0x02ec68f2 = 49047794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f2 68 ec f2 00 00:07:07.630 READ DMA
ec 00 00 00 00 00 b0 02 00:07:03.309 IDENTIFY DEVICE
ef 03 42 00 00 00 b0 02 00:07:03.309 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 b0 02 00:07:03.300 IDENTIFY DEVICE
c8 00 08 f2 68 ec f2 00 00:07:15.265 READ DMA
Error 359 occurred at disk power-on lifetime: 21851 hours (910 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f2 68 ec f2 Error: UNC 8 sectors at LBA = 0x02ec68f2 = 49047794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f2 68 ec f2 00 00:07:07.630 READ DMA
ec 00 00 00 00 00 b0 02 00:07:03.309 IDENTIFY DEVICE
ef 03 42 00 00 00 b0 02 00:07:03.309 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 b0 02 00:07:03.300 IDENTIFY DEVICE
c8 00 08 f2 68 ec f2 00 00:07:03.292 READ DMA
Error 358 occurred at disk power-on lifetime: 21851 hours (910 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f2 68 ec f2 Error: UNC 8 sectors at LBA = 0x02ec68f2 = 49047794
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 f2 68 ec f2 00 00:07:07.630 READ DMA
ec 00 00 00 00 00 b0 02 00:07:03.309 IDENTIFY DEVICE
ef 03 42 00 00 00 b0 02 00:07:03.309 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 b0 02 00:07:03.300 IDENTIFY DEVICE
c8 00 08 f2 68 ec f2 00 00:07:03.292 READ DMA
********************************
Hogy a fenébe lehet a PATÁkat könnyedén levenni?? Tud vki technikát erre?