Új hozzászólás Aktív témák

• #85 Paulo81 aktív tag

  Új Válasz 2010-09-26 11:52:24 #85

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Paulo81

  aktív tag

  Pörög a topik...

  A látszólagos partíciót választottam, el is kezdte az írást, minden gyönyörűen ment 98 %-ig, aztán a nero hibás író állapotra váltott, majd írás hiba ablak előjött.
  Ja és 2x-esen szerettem volna írni, de tuti egyszeresen írt...
  Mit tegyek hogy elkerüljem a jövőben az ilyeneket?
  A napló, remélem mond nektek valamit: (Az udf driver fent van, ja és a lemez is olvasható egy file-t kivéve, amit ugye nem írt meg)

  Windows XP 5.1
  IA32
  WinAspi: -

  NT-SPTI used
  Nero Version: 9.4.17.100
  Internal Version: 9, 4, 17, 100

  Recorder: <PLEXTOR BD-R PX-B940SA>Version: 1.08 - HA 1 TA 1 - 9.4.17.100
  Adapter driver: <Serial ATA> HA 1
  Drive buffer : 4000kB
  Bus Type : via Inquiry data
  Connected to MMC as unknown drive with class-nr : 1
  Drive is autodetected - recorder class: Std. MMC recorder
  CD-ROM: <LITE-ON DVDRW LH-20A1H >Version: LL0D - HA 1 TA 0 - 9.4.17.100
  Adapter driver: <IDE> HA 1

  === Scsi-Device-Map ===
  CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 0 ID 0 DMA: On
  DiskPeripheral : SAMSUNG HD103UJ 1AA0 nvgts Port 2 ID 0 DMA: Off
  DiskPeripheral : WDC WD3200KS-00PFB0 21.0 nvgts Port 2 ID 1 DMA: Off
  CdRomPeripheral : PLEXTOR BD-R PX-B940SA1.08 nvgts Port 3 ID 0 DMA: Off

  === CDRom-Device-Map ===
  LITE-ON DVDRW LH-20A1H K: CdRom0
  PLEXTOR BD-R PX-B940SA L: CdRom1
  =======================

  AutoRun : 0
  Excluded drive IDs:
  WriteBufferSize: 83886080 (83886080) Byte
  BUFE : 0
  Physical memory : 2046MB (2095532kB)
  Free physical memory: 1065MB (1090736kB)
  Memory in use : 47 %
  Uncached PFiles: 0x0
  Global Bus Type: default (0)
  Check supported media : Disabled (0)

  25.9.2010
  UDF összeállítás
  20:34:09 #1 Text 0 File SCSIPTICommands.cpp, Line 430
  LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

  20:34:09 #2 Text 0 File Isodoc.cpp, Line 6998
  UDF document burn settings
  ------------------------------------------
  Determine maximum speed : FALSE
  Simulate : FALSE
  Write : TRUE
  Finalize CD : TRUE
  Multisession : FALSE
  Burning mode : DAO
  Mode : 1
  UDF Mode : pure
  UDF Options : manual
  UDF Revision : 2.50
  UDF Partition Type : virtual

  20:34:09 #3 Text 0 File Burncd.cpp, Line 3572
  Turn on Disc-At-Once, using Blu-ray Disc media

  20:34:10 #4 Text 0 File DlgWaitCD.cpp, Line 313
  Total disc capacity: 12018688 23474MB
  User data to be written: 11969408 23377MB
  Free space on disc: 12219392 23866MB

  20:34:10 #5 Text 0 File DlgWaitCD.cpp, Line 325
  Write in overburning mode: NO

  20:34:10 #6 Text 0 File DlgWaitCD.cpp, Line 2843
  Recorder: PLEXTOR BD-R PX-B940SA, Media type: BD-R (seq)

  20:34:10 #7 Text 0 File DlgWaitCD.cpp, Line 500
  >>> Protocol of DlgWaitCD activities: <<<
  =========================================

  20:34:10 #8 Text 0 File ThreadedTransferInterface.cpp, Line 739
  Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 ()
  2 indices, index0 (150) not provided
  original disc pos #0 + 11969408 (11969408) = #11969408/2659:52.8
  relocatable, disc pos for caching/writing not required/ required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11969408 blocks
  --------------------------------------------------------------

  20:34:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 941
  Prepare (L: PLEXTOR BD-R PX-B940SA) for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN: ""
  TOCType: 0x00; Session Closed, disc fixated
  Tracks 1 to 1: Idx 0 Idx 1 Next Trk
  1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 24513347584, ISRC ""
  DAO layout:
  ===========
  ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
  0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
  0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
  0 | 1 | 1 | 0x41 | 11969408 | 0 | 0x00
  11969408 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

  20:34:10 #10 Text 0 File SCSIPTICommands.cpp, Line 217
  SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

  20:34:10 #11 Text 0 File Burncd.cpp, Line 4279
  Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

  20:34:10 #12 Phase 24 File dlgbrnst.cpp, Line 1767
  Caching of files started

  20:34:10 #13 Text 0 File Burncd.cpp, Line 4401
  Cache writing successful.

  20:34:10 #14 Phase 25 File dlgbrnst.cpp, Line 1767
  Caching of files completed

  20:34:10 #15 Phase 36 File dlgbrnst.cpp, Line 1767
  Burn process started at 2x (8 990 KB/s)

  20:34:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2695
  Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

  20:34:10 #17 Text 0 File Cdrdrv.cpp, Line 10168
  ---- Disc Structure (BD): Disc Information on BD (00h) ----
  Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
  --- Header ---
  Disc Information Identifier: <DI>
  Disc Information Format: 01 h
  Number of DI Units/Aux Frames in each DI block: 3
  Number of (recording) layer to which this DI Unit applies: 0
  DI unit Sequence Number in DI Block: 0
  Continuation flag: Next DI Unit is the start of a new set of parameters (0)
  Number of DI bytes in use in this DI unit: 98
  --- Body ---
  Disc Type Identifier: <BDR>
  Disc Size/Class/Version: 1
  DI Unit Format dependent contents:
  BD Structure: 18 (12 h):
  1 recording layer (SL), BD-R
  Hybrid Disc identifier/Channel bit length: 1 (1 h):
  no DVD layer present, no CD layer present
  channel bit length of 74,5 nm (25.0 GB max. per layer)
  Push-Pull polarity flag bits: 00 h
  Recorded mark polarity flag bits: 00 h
  BCA descriptor: BCA-code present (1)

  20:34:28 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 215
  CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
  CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
  Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Sense Code: 0x24
  Sense Qual: 0x00
  Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
  Buffer x061583c0: Len x648

  20:34:28 #19 Text 0 File BD.cpp, Line 392
  Format BD-R with Format Type 0h, sub-type 0, spare area size 0 -> return code 0
  Allocated spare area size on disc 196608
  Allocated spare area size on disc 196608
  BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
  spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

  20:34:29 #20 Text 0 File ThreadedTransfer.cpp, Line 273
  Pipe memory size 83836800

  22:21:07 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 215
  CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
  CDB Data: 0x2A 00 00 B4 74 00 00 00 20 00 00 00
  Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Sense Code: 0x24
  Sense Qual: 0x00
  Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
  Buffer x09ed38c0: Len x10000
  0xF7 8C C9 6D 88 88 EB 6B 62 F0 A4 FD 70 14 DD 2D
  0xF5 99 39 5A 95 B4 ED 3E 6A E8 60 E1 81 82 BE 66
  0xD5 F6 22 75 AF A7 8E A3 E9 A9 DF 6E 20 1C 56 06

  22:21:07 #22 CDR -1066 File Writer.cpp, Line 306
  Invalid field in command
  L: PLEXTOR BD-R PX-B940SA

  22:21:17 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1452
  SetDriveCaps: Set LAST LBA of layer 1 to 0

  22:21:17 #24 Phase 38 File dlgbrnst.cpp, Line 1767
  Burn process failed at 2x (8 990 KB/s)

  22:21:17 #25 Text 0 File SCSIPTICommands.cpp, Line 267
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  22:21:21 #26 Text 0 File Cdrdrv.cpp, Line 11478
  DriveLocker: UnLockVolume completed

  22:21:21 #27 Text 0 File SCSIPTICommands.cpp, Line 430
  UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:

  Registry Keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Új hozzászólás Aktív témák