Itt a kimenet:

(egyébként a Disks-nek a smart része vacak, de a sebesség ellenőrző része tökéletes)

Ahogy látom, hiba az nincs rajta, az az 1-es értékű hibánál nem a Value - pedig de!

ubyegon@mint19c-HP-EliteBook-8570p:~$ sudo fdisk -l
[sudo] ubyegon jelszava:
Disk /dev/sda: 111,8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x72ec28b3

Eszköz Indítható Start Vége Szektorok Size Id Típus
/dev/sda1 * 2048 41945407 41943360 20G 83 Linux
/dev/sda2 41947136 234440703 192493568 91,8G 5 Kiterjesztett
/dev/sda5 193478656 234440703 40962048 19,5G 83 Linux

ubyegon@mint19c-HP-EliteBook-8570p:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-33-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV500120G
Serial Number: 50026B7282050252
LU WWN Device Id: 5 0026b7 282050252
Firmware Version: 003056R6
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 8 20:32:13 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 0) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 1
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 35704
101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 9832
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 3
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 52
178 Used_Rsvd_Blk_Cnt_Chip 0x0002 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0002 100 100 000 Old_age Always - 251
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 039 100 000 Old_age Always - 39 (Min/Max 19/41)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 1
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
204 Soft_ECC_Correction 0x0032 100 100 000 Old_age Always - 1
231 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 134
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 115
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 119
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 101
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 1

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Aborted by host 80% 0 -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[ Szerkesztve ]