Új hozzászólás Aktív témák

• #35345 Vladi nagyúr

  Új Válasz 2025-12-29 20:28:23 #35345

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Vladi

  nagyúr

  Van egy laptop hdd-m ami 1 terás és egy ps3-ban szolgált eddig. Időnként lefagyott a gép, akkor csak az áramtalanítás segített. Egy file system ellenőrzés és újraépítés után működött egy darabig. De most végképp megadta magát. A konzol nem bootolt vele, file rendszert se tudta helyre hozni semmi. Smart szerint 100/100-as.

  Fut a badblocs egyenlőre nincs hiba.

  smartctl -a ezt mondja rá: Én itt egyelőre nem találok hibát.

  root@k10:~# smartctl -a /dev/sdf
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-41-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MQ01ABD...
Device Model:     TOSHIBA MQ01ABD100
Serial Number:    35N9P57GT
LU WWN Device Id: 5 000039 622589438
Firmware Version: AX003J
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Dec 29 20:19:04 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (  120) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 236) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1857
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       31228
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       9322
 10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2178
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       3004
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       244
193 Load_Cycle_Count        0x0032   095   095   000    Old_age   Always       -       52023
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       27 (Min/Max 14/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       8
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8261
222 Loaded_Hours            0x0032   085   085   000    Old_age   Always       -       6270
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       179
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
SMART Error Log Version: 1
ATA Error Count: 74 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 74 occurred at disk power-on lifetime: 9322 hours (388 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 c8 13 09 4f  Error: UNC 8 sectors at LBA = 0x0f0913c8 = 252253128
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 c8 13 09 40 00      00:05:14.509  READ DMA EXT
  ec 00 00 00 00 00 00 00      00:05:14.507  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00      00:05:14.506  IDENTIFY DEVICE
  25 00 08 c8 13 09 40 00      00:05:10.704  READ DMA EXT
  25 00 08 c8 13 09 40 00      00:05:06.930  READ DMA EXT
Error 73 occurred at disk power-on lifetime: 9322 hours (388 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 c8 13 09 4f  Error: UNC 8 sectors at LBA = 0x0f0913c8 = 252253128
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 c8 13 09 40 00      00:05:10.704  READ DMA EXT
  25 00 08 c8 13 09 40 00      00:05:06.930  READ DMA EXT
  ec 00 00 00 00 00 00 00      00:05:06.929  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00      00:05:06.928  IDENTIFY DEVICE
  25 00 08 c8 13 09 40 00      00:05:03.126  READ DMA EXT
Error 72 occurred at disk power-on lifetime: 9322 hours (388 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 c8 13 09 4f  Error: UNC 8 sectors at LBA = 0x0f0913c8 = 252253128
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 c8 13 09 40 00      00:05:06.930  READ DMA EXT
  ec 00 00 00 00 00 00 00      00:05:06.929  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00      00:05:06.928  IDENTIFY DEVICE
  25 00 08 c8 13 09 40 00      00:05:03.126  READ DMA EXT
  25 00 08 c8 13 09 40 00      00:04:59.353  READ DMA EXT
Error 71 occurred at disk power-on lifetime: 9322 hours (388 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 c8 13 09 4f  Error: UNC 8 sectors at LBA = 0x0f0913c8 = 252253128
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 c8 13 09 40 00      00:05:03.126  READ DMA EXT
  25 00 08 c8 13 09 40 00      00:04:59.353  READ DMA EXT
  ec 00 00 00 00 00 00 00      00:04:59.351  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00      00:04:59.350  IDENTIFY DEVICE
  25 00 08 c8 13 09 40 00      00:04:55.547  READ DMA EXT
Error 70 occurred at disk power-on lifetime: 9322 hours (388 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 c8 13 09 4f  Error: UNC 8 sectors at LBA = 0x0f0913c8 = 252253128
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 c8 13 09 40 00      00:04:59.353  READ DMA EXT
  ec 00 00 00 00 00 00 00      00:04:59.351  IDENTIFY DEVICE
  ec 00 00 00 00 00 00 00      00:04:59.350  IDENTIFY DEVICE
  25 00 08 c8 13 09 40 00      00:04:55.547  READ DMA EXT
  25 00 08 c8 13 09 40 00      00:04:51.774  READ DMA EXT
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      7925         -
# 2  Short offline       Completed without error       00%      7915         -
# 3  Short offline       Completed without error       00%      6323         -
# 4  Short offline       Completed without error       00%      2291         -
# 5  Short offline       Completed without error       00%      2118         -
# 6  Short offline       Completed without error       00%      2114         -
# 7  Short offline       Completed without error       00%      1988         -
# 8  Short offline       Completed without error       00%        99         -
# 9  Short offline       Aborted by host               60%        87         -
#10  Short offline       Completed without error       00%        52         -
#11  Short offline       Aborted by host               10%        47         -
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Új hozzászólás Aktív témák