Hirdetés

  2. Fórumok
  3. OS, alkalmazások
  4. Linux kezdőknek
  5. (kiemelt téma)
  • Téma összefoglaló
    Utoljára frissítve: 2023-12-13 05:03

    LOGOUT

    Linux kezdőknek - érdemes beleolvasni, mielőtt kérdezel

Új hozzászólás Aktív témák

  • #41827 kkdesign senior tag ubyegon2 #41826
    Új Válasz #41827
    Új hozzászólás
    Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
    Privát üzenet küldése

    kkdesign

    senior tag

    válasz ubyegon2 #41826 üzenetére

    feltettem a toolst, le is futott a parancs, nem látok hibára utaló jelet

    ezek után van akkor még más dolgom? :)

    smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.19.0-32-generic] (local build)
    Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

    === START OF INFORMATION SECTION ===
    Device Model: Samsung SSD 840 EVO 120GB
    Serial Number: S1D5NSAF645850N
    LU WWN Device Id: 5 002538 8a04ca1bf
    Firmware Version: EXT0DB6Q
    User Capacity: 120.034.123.776 bytes [120 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: Solid State Device
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
    SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Sun Nov 8 15:10:10 2015 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 4200) seconds.
    Offline data collection
    capabilities: (0x53) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    No Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 70) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 1
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
    9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3802
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 865
    177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 23
    179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
    181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
    182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
    183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    190 Airflow_Temperature_Cel 0x0032 071 039 000 Old_age Always - 29
    195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
    199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
    235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 73
    241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 7493192964

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]


    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

Új hozzászólás Aktív témák