Új hozzászólás Aktív témák

• #666 bon őstag

  Új Válasz 2015-06-28 19:14:36 #666

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  bon

  őstag

  Új iLO firmware érhető el. v2.20-as verzió:

  Változások:

  This version adds support for the following features and enhancements:

  • The Remote Console security settings were moved from the Administration >
  Security > Remote Console page to the Remote Console > Security page.
  • The new Authentication Failure Delay Time setting allows users to
  configure the duration of the iLO login delay after a failed login attempt.
  This setting can be configured on the Access Settings page.
  • The new Authentication Failures Before Delay setting allows users to configure
  the number of failed login attempts that are allowed before iLO imposes a
  login delay. This setting can be configured on the Access Settings page.
  • iLO 4 2.20 and later allows you to install more than one language pack.
  - For iLO 4 2.10 and earlier—You can install one language pack at a time.
  Installing a new language pack replaces the currently installed language
  pack, regardless of the language pack version.
  - For iLO 4 2.20 and later—Language packs are not supported on servers that
  do not have a NAND. Servers without a NAND should continue to use iLO
  4 2.10.
  - iLO 4 2.20 or later requires version 2.20 or later of the iLO language
  pack.
  - When you upgrade from an earlier version of iLO 4 to version 2.20 or
  later, previously installed language packs are deleted.
  - The following language packs are available: Japanese and Simplified
  Chinese.
  • The HP ProLiant Agentless Management Service status is now listed on the
  Information > System Information > Summary page.
  • Trusted Module status is now displayed on the Information > Overview page.
  • RIBCL scripts and the CLP can now be used to send a test trap to test the
  SNMP configuration.
  • Added support for IPv6 in IPMI LAN Configuration Command Parameters.

Új hozzászólás Aktív témák