Sziasztok!

Nemreg feltettem otthon az asztali gepemre egy xubuntu-t (12.10). A legnagyobb problemam, hogy nem sikerul suspend-bol kihozni a gepet a billenyuzet vagy eger segitsegevel. Mar eleg sokat turtam a netet, de meg egyik leiras sem segitett. Errol a vezetek nelkuli bill+eger comborol van szo: http://www.logitech.com/en-us/support/4677

Nehany parancs kimenete, csak hogy latszodjon miket neztem/probaltam eddig

lsusb:

Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
Bus 004 Device 002: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter
Bus 004 Device 003: ID 046d:c529 Logitech, Inc. diNovo Keyboard for notebooks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Kicsit furcsa, hogy "diNovo Keyboard"-kent jelenik meg.

lsusb -t

4-1:1.1: No such file or directory
4-1:1.3: No such file or directory
4-1:1.5: No such file or directory
4-1:1.7: No such file or directory
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=vend., Driver=xpad, 12M
|__ Port 1: Dev 2, If 1, Class=vend., Driver=, 12M
|__ Port 1: Dev 2, If 2, Class=vend., Driver=xpad, 12M
|__ Port 1: Dev 2, If 3, Class=vend., Driver=, 12M
|__ Port 1: Dev 2, If 4, Class=vend., Driver=xpad, 12M
|__ Port 1: Dev 2, If 5, Class=vend., Driver=, 12M
|__ Port 1: Dev 2, If 6, Class=vend., Driver=xpad, 12M
|__ Port 1: Dev 2, If 7, Class=vend., Driver=, 12M
|__ Port 2: Dev 3, If 0, Class=HID, Driver=usbhid, 12M
|__ Port 2: Dev 3, If 1, Class=HID, Driver=usbhid, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 2: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 6: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M

cat /sys/bus/usb/devices/4-2/power/wakeup -> "Enabled".

dmesg | grep -i logitech

[ 2.177462] usb 4-2: Manufacturer: Logitech
[ 2.193038] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2
[ 2.193118] hid-generic 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0
[ 2.193610] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input3
[ 2.193727] hid-generic 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1

cat /proc/acpi/wakeup

Device S-state Status Sysfs node
P0P2 S4 *disabled pci:0000:00:01.0
P0P1 S4 *disabled pci:0000:00:1e.0
UAR1 S4 *disabled pnp:00:09
PS2K S4 *enabled pnp:00:0b
PS2M S4 *disabled pnp:00:0c
EUSB S4 *enabled pci:0000:00:1d.7
USBE S4 *enabled pci:0000:00:1a.7
P0P5 S4 *disabled
P0P6 S4 *disabled
P0P7 S4 *disabled
P0P8 S4 *disabled pci:0000:00:1c.4
P0P9 S4 *disabled pci:0000:00:1c.5
USB0 S4 *enabled pci:0000:00:1d.0
USB1 S4 *enabled pci:0000:00:1d.1
USB2 S4 *enabled pci:0000:00:1d.2
USB3 S4 *disabled
USB4 S4 *enabled pci:0000:00:1a.0
USB5 S4 *enabled pci:0000:00:1a.1
USB6 S4 *enabled pci:0000:00:1a.2
P0P4 S4 *disabled pci:0000:00:1c.0

Esetleg valamilyen BIOS beallitason mulna?
Bar ez nem sokat jelent, de Windowsbol mukodik a dolog.

Mit lehetne meg megprobalni?

Udv,

hk0

[ Szerkesztve ]