Új hozzászólás Aktív témák

• #70406 csixy addikt

  Új Válasz 2020-02-02 22:11:49 #70406

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  csixy

  addikt

  Sziasztok! Még mindig a bárhol (UEFI és Legacy, 32 és 64 bit) bebootolható USB-s eszközre való linux telepítést akarom megoldani erre az eszközre (az első partíció lesz az ESP, a másodikra kerül a 64 bites telepítés, a harmadikra a 32 bites majd UEFI és Legacy körülmények között is Grubbal egymás után telepítgetve):
  
  Ezt alakítgattam át gdisk segítségével hibrid GPT-MBR szerkentyűvé. Jól csináltam eddig?

  [azenn@azen-pc ~]$ sudo gdisk /dev/sdc
  [sudo] azenn jelszava:
  GPT fdisk (gdisk) version 1.0.4

  Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

  Found valid GPT with protective MBR; using GPT.

  Command (? for help): r

  Recovery/transformation command (? for help): p
  Disk /dev/sdc: 1465149166 sectors, 698.6 GiB
  Model: Storage Device
  Sector size (logical/physical): 512/512 bytes
  Disk identifier (GUID): B042A8F4-41B1-483E-B1B2-90936DBD23FF
  Partition table holds up to 128 entries
  Main partition table begins at sector 2 and ends at sector 33
  First usable sector is 34, last usable sector is 1465149132
  Partitions will be aligned on 2048-sector boundaries
  Total free space is 3755 sectors (1.8 MiB)

  Number Start (sector) End (sector) Size Code Name
  1 2048 1048575 511.0 MiB 0700
  2 1048576 734003199 349.5 GiB 8300
  3 734003200 1465147391 348.6 GiB 8300

  Recovery/transformation command (? for help): h

  WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
  just hit the Enter key at the below prompt and your MBR partition table will
  be untouched.

  Type from one to three GPT partition numbers, separated by spaces, to be
  added to the hybrid MBR, in sequence: 1 2 3
  Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y

  Creating entry for GPT partition #1 (MBR partition #2)
  Enter an MBR hex code (default 07): 0c
  Set the bootable flag? (Y/N): y

  Creating entry for GPT partition #2 (MBR partition #3)
  Enter an MBR hex code (default 83): 83
  Set the bootable flag? (Y/N): n

  Creating entry for GPT partition #3 (MBR partition #4)
  Enter an MBR hex code (default 83): 83
  Set the bootable flag? (Y/N): n

  Recovery/transformation command (? for help): o

  Disk size is 1465149166 sectors (698.6 GiB)
  MBR disk identifier: 0x00000000
  MBR partitions:

  Number Boot Start Sector End Sector Status Code
  1 1 2047 primary 0xEE
  2 * 2048 1048575 primary 0x0C
  3 1048576 734003199 primary 0x83
  4 734003200 1465147391 primary 0x83

  Recovery/transformation command (? for help): w

  Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
  PARTITIONS!!

  Do you want to proceed? (Y/N): y
  OK; writing new GUID partition table (GPT) to /dev/sdc.
  Warning: The kernel is still using the old partition table.
  The new table will be used at the next reboot or after you
  run partprobe(8) or kpartx(8)
  The operation has completed successfully.
  [azenn@azen-pc ~]$

  [azenn@azen-pc ~]$ sudo gdisk /dev/sdc
  [sudo] azenn jelszava:
  GPT fdisk (gdisk) version 1.0.4
  Partition table scan:
  MBR: hybrid
  BSD: not present
  APM: not present
  GPT: present
  Found valid GPT with hybrid MBR; using GPT.
  Command (? for help): r
  Recovery/transformation command (? for help): p
  Disk /dev/sdc: 1465149166 sectors, 698.6 GiB
  Model: Storage Device
  Sector size (logical/physical): 512/512 bytes
  Disk identifier (GUID): B042A8F4-41B1-483E-B1B2-90936DBD23FF
  Partition table holds up to 128 entries
  Main partition table begins at sector 2 and ends at sector 33
  First usable sector is 34, last usable sector is 1465149132
  Partitions will be aligned on 2048-sector boundaries
  Total free space is 3755 sectors (1.8 MiB)
  Number Start (sector) End (sector) Size Code Name
  1 2048 1048575 511.0 MiB 0700
  2 1048576 734003199 349.5 GiB 8300
  3 734003200 1465147391 348.6 GiB 8300
  Recovery/transformation command (? for help): q
  [azenn@azen-pc ~]$

  Elnézést kérek a kissé hosszú szövegért !

Új hozzászólás Aktív témák