Új hozzászólás Aktív témák

• #7952 itg tag Janos250 #7950

  Új Válasz 2018-02-25 16:03:06 #7952

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  itg

  tag

  válasz Janos250 #7950 üzenetére

  WiFi.status = 3 és a pingre nem válaszol, illetve a routeren sem látszik a csatlakoztatott eszközöknél.

  ez a kódom:

  #include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <DHT.h>
#define DHTPIN D4
#define DHTTYPE DHT22
const char* ssid = "ssid";
const char* password = "pw";
const char* server = "10.0.0.10";
const char* source = "konyha";
IPAddress ip(10, 0, 0, 80);
IPAddress gateway(10,0,0,1);
IPAddress subnet(255,255,255,0);
float humidity;
float temperature;
String data;
byte mac[6];

WiFiClient client;
DHT dht(DHTPIN, DHTTYPE);

void connectwifi()
{
WiFi.config(ip, gateway, subnet);
WiFi.mode(WIFI_STA);
delay(3000);
WiFi.begin(ssid, password);
delay(3000);
while (WiFi.status() != WL_CONNECTED) { Serial.print("Wifi status: "); Serial.print(WiFi.status()); Serial.println(" "); delay(1000); }
Serial.println();
WiFi.macAddress(mac);
delay(10000); //dhcp
Serial.print("Connected to local network: ");
Serial.print("MAC: "); Serial.print(mac[0],HEX); Serial.print(":"); Serial.print(mac[1],HEX); Serial.print(":"); Serial.print(mac[2],HEX); Serial.print(":"); Serial.print(mac[3],HEX); Serial.print(":"); Serial.print(mac[4],HEX); Serial.print(":"); Serial.print(mac[5],HEX);
Serial.print(" IP: ");
Serial.print(WiFi.localIP());
Serial.print(" GW: ");
Serial.print(WiFi.gatewayIP());
Serial.print(" Wifi status: ");
Serial.print(WiFi.status());
Serial.printf(" RSSI: %d dBm\n", WiFi.RSSI());
}

void disconnectwifi()
{
if ( WiFi.status() != WL_DISCONNECTED )
{
WiFi.disconnect();
}
}

bool httppush()
{
if (client.connect(server, 80))
{
client.println("POST /mrtg/push_konyha.php HTTP/1.1");
client.println("Host: ");
client.println("Content-Type: application/x-www-form-urlencoded");
client.print("Content-Length: ");
client.println(data.length());
client.println();
client.print(data);
}
else
{
Serial.println("Connection failed. Rebooting.");
ESP.restart();
}
if (client.available())
{
char c = client.read();
Serial.print(c);
}
if (client.connected())
{
client.stop();
}
}
void setup()
{
Serial.begin(9600);
delay(1000);
Serial.println("Init progress: boot");
delay(5000);
Serial.println("Init progress: dht start");
dht.begin();
delay(5000);
}
void loop()
{
delay(5000);
Serial.println("Loop progress: wait 4 min");
delay(600000);
//delay(10000);
Serial.print("Loop progress: wifi start");
connectwifi();
Serial.println("Loop progress: reading from DHT22");
humidity = dht.readHumidity();
temperature= dht.readTemperature();
if (isnan(humidity) || isnan(temperature))
{
Serial.println("Failed to read from DHT sensor! Rebooting.");
ESP.restart();
}
else
{
Serial.print("Temperature: ");
Serial.println(temperature);
Serial.print("Humidity: ");
Serial.println(humidity);
Serial.print("Loop progress: connect to ");
Serial.print(server);
Serial.println("");
data = "source=" + String(source) + "&temperature=" + String(temperature) + "&humidity=" + String(humidity);
Serial.println("Loop progress: sending data");
delay(5000);
httppush();
delay(5000);
Serial.println("Loop progress: wifi stop");
disconnectwifi();
}
}

Új hozzászólás Aktív témák