Új hozzászólás Aktív témák

• #55677 douggutaby tag Raymond #55676

  Új Válasz 2024-11-09 08:29:31 #55677

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  douggutaby

  tag

  válasz Raymond #55676 üzenetére

  smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-15-amd64] (local build)Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===Model Family:     Crucial/Micron Client SSDsDevice Model:     CT500MX500SSD1Serial Number:    2349E887190ELU WWN Device Id: 5 00a075 1e887190eFirmware Version: M3CR046User Capacity:    500,107,862,016 bytes [500 GB]Sector Sizes:     512 bytes logical, 4096 bytes physicalRotation Rate:    Solid State DeviceForm Factor:      2.5 inchesTRIM Command:     AvailableDevice is:        In smartctl database 7.3/5319ATA Version is:   ACS-3 T13/2161-D revision 5SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is:    Sat Nov  9 08:28:34 2024 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED
General SMART Values:Offline data collection status:  (0x80)    Offline data collection activity                    was never started.                    Auto Offline Data Collection: Enabled.Self-test execution status:      (   0)    The previous self-test routine completed                    without error or no self-test has ever                    been run.Total time to complete Offlinedata collection:         (    0) seconds.Offline data collectioncapabilities:              (0x7b) SMART execute Offline immediate.                    Auto Offline data collection on/off support.                    Suspend Offline collection upon new                    command.                    Offline surface scan supported.                    Self-test supported.                    Conveyance Self-test supported.                    Selective Self-test supported.SMART capabilities:            (0x0003)    Saves SMART data before entering                    power-saving mode.                    Supports SMART auto save timer.Error logging capability:        (0x01)    Error logging supported.                    General Purpose Logging supported.Short self-test routinerecommended polling time:      (   2) minutes.Extended self-test routinerecommended polling time:      (  30) minutes.Conveyance self-test routinerecommended polling time:      (   2) minutes.SCT capabilities:            (0x0031)    SCT Status supported.                    SCT Feature Control supported.                    SCT Data Table supported.
SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0  5 Reallocate_NAND_Blk_Cnt 0x0032   100   100   010    Old_age   Always       -       0  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       6788 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       20171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0173 Ave_Block-Erase_Count   0x0032   089   089   000    Old_age   Always       -       110174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       6180 Unused_Reserve_NAND_Blk 0x0033   000   000   000    Pre-fail  Always       -       61183 SATA_Interfac_Downshift 0x0032   100   100   000    Old_age   Always       -       0184 Error_Correction_Count  0x0032   100   100   000    Old_age   Always       -       0187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0194 Temperature_Celsius     0x0022   060   039   000    Old_age   Always       -       40 (Min/Max 0/61)196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0197 Current_Pending_ECC_Cnt 0x0032   100   100   000    Old_age   Always       -       0198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0202 Percent_Lifetime_Remain 0x0030   089   089   001    Old_age   Offline      -       11206 Write_Error_Rate        0x000e   100   100   000    Old_age   Always       -       0210 Success_RAIN_Recov_Cnt  0x0032   100   100   000    Old_age   Always       -       0246 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       20100747728247 Host_Program_Page_Count 0x0032   100   100   000    Old_age   Always       -       266652813248 FTL_Program_Page_Count  0x0032   100   100   000    Old_age   Always       -       217409193
SMART Error Log Version: 1No Errors Logged
SMART Self-test log structure revision number 1No self-tests have been logged.  [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Not_testing    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Completed [00% left] (0-65535)Selective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.

  nem bírom idemásolni hogy megtartsa a formázást

  [ Szerkesztve ]

Új hozzászólás Aktív témák