Hirdetés
- gban: Ingyen kellene, de tegnapra
- D1Rect: Nagy "hülyétkapokazapróktól" topik
- Pajac: PassMark - Intel Core2 Quad Q9400
- Luck Dragon: Asszociációs játék. :)
- Lalikiraly: Kinek milyen setupja van?
- sziku69: Fűzzük össze a szavakat :)
- Sub-ZeRo: Euro Truck Simulator 2 & American Truck Simulator 1 (esetleg 2 majd, ha lesz) :)
- Kalandor: „Ha engedtem volna a lelkiismeretemnek, az üzlet kevésbé lett volna jövedelmező”
- Brogyi: CTEK akkumulátor töltő és másolatai
- btz: Internet fejlesztés országosan!
Új hozzászólás Aktív témák
-
vtechun
veterán
#!/bin/bash
# Wonder Shaper
# please read the README before filling out these values
#
# Set the following values to somewhat less than your actual download
# and uplink speed. In kilobits. Also set the device that is to be shaped.
DOWNLINK=360
UPLINK=60
DEV=ppp0
# low priority OUTGOING traffic - you can leave this blank if you want
# low priority source netmasks
NOPRIOHOSTSRC=
# low priority destination netmasks
NOPRIOHOSTDST=
# low priority source ports
NOPRIOPORTSRC=
# low priority destination ports
NOPRIOPORTDST=
# Now remove the following two lines
#echo Please read the documentation in 'README' first
#exit
if [ ''$1'' = ''status'' ]
then
tc -s qdisc ls dev $DEV
tc -s class ls dev $DEV
exit
fi
# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null
if [ ''$1'' = ''stop'' ]
then
exit
fi
###### uplink
# install root HTB, point default traffic to 1:20:
tc qdisc add dev $DEV root handle 1: htb default 20
# shape everything at $UPLINK speed - this prevents huge queues in your
# DSL modem which destroy latency:
tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k
# high prio class 1:10:
tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit \
burst 6k prio 1
# bulk & default class 1:20 - gets slightly less traffic,
# and a lower priority:
tc class add dev $DEV parent 1:1 classid 1:20 htb rate $[9*$UPLINK/10]kbit \
burst 6k prio 2
tc class add dev $DEV parent 1:1 classid 1:30 htb rate $[8*$UPLINK/10]kbit \
burst 6k prio 2
# all get Stochastic Fairness:
tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10
# TOS Minimum Delay (ssh, NOT scp) in 1:10:
tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \
match ip tos 0x10 0xff flowid 1:10
# ICMP (ip protocol 1) in the interactive class 1:10 so we
# can do measurements & impress our friends:
tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \
match ip protocol 1 0xff flowid 1:10
# To speed up downloads while an upload is going on, put ACK packets in
# the interactive class:
tc filter add dev $DEV parent 1: protocol ip prio 10 u32 \
match ip protocol 6 0xff \
match u8 0x05 0x0f at 0 \
match u16 0x0000 0xffc0 at 2 \
match u8 0x10 0xff at 33 \
flowid 1:10
# rest is 'non-interactive' ie 'bulk' and ends up in 1:20
# some traffic however suffers a worse fate
for a in $NOPRIOPORTDST
do
tc filter add dev $DEV parent 1: protocol ip prio 14 u32 \
match ip dport $a 0xffff flowid 1:30
done
for a in $NOPRIOPORTSRC
do
tc filter add dev $DEV parent 1: protocol ip prio 15 u32 \
match ip sport $a 0xffff flowid 1:30
done
for a in $NOPRIOHOSTSRC
do
tc filter add dev $DEV parent 1: protocol ip prio 16 u32 \
match ip src $a flowid 1:30
done
for a in $NOPRIOHOSTDST
do
tc filter add dev $DEV parent 1: protocol ip prio 17 u32 \
match ip dst $a flowid 1:30
done
# rest is 'non-interactive' ie 'bulk' and ends up in 1:20
tc filter add dev $DEV parent 1: protocol ip prio 18 u32 \
match ip dst 0.0.0.0/0 flowid 1:20
########## downlink #############
# slow downloads down to somewhat less than the real speed to prevent
# queuing at our ISP. Tune to see how high you can set it.
# ISPs tend to have *huge* queues to make sure big downloads are fast
#
# attach ingress policer:
tc qdisc add dev $DEV handle ffff: ingress
# filter *everything* to it (0.0.0.0/0), drop everything that's
# coming in too fast:
tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \
0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1
jelenleg ezt használom, és az a gáz, hogy a dc-seknek iszonyat belassul egy idő után, mármint akik töltenek le rólam...
[Szerkesztve]
Új hozzászólás Aktív témák
- Autós topik látogatók beszélgetős, offolós topikja
- Villanyszerelés
- SSD kibeszélő
- Battlefield 6
- Telekom otthoni szolgáltatások (TV, internet, telefon)
- Samsung Galaxy A34 - plus size modell
- „Új mérce az Android világában” – Kezünkben a Vivo X300 és X300 Pro
- One otthoni szolgáltatások (TV, internet, telefon)
- 5.1, 7.1 és gamer fejhallgatók
- A fociról könnyedén, egy baráti társaságban
- További aktív témák...
- Új elekrtomos rollerek 2/3 áron és e-bike dobozban, 1 év garanciával:
- 145 - Lenovo Legion Pro 7 (16IRX9H) - Intel Core i9-14900HX, RTX 4090 (ELKELT)
- Fujitsu LIFEBOOK E449 i3-8130U 12GB 512GB 14" FHD 1 év garancia
- Gombászkönyvek egyben
- Intel Core i5-9500 / i5-9500T / i7-8700 / i7-9700 CPU, processzor - Számla, garancia
Állásajánlatok
Cég: Promenade Publishing House Kft.
Város: Budapest
Cég: PCMENTOR SZERVIZ KFT.
Város: Budapest