Új hozzászólás Aktív témák

• #2125 kutga félisten Intruder2k5 #2123

  Új Válasz 2020-11-11 23:34:26 #2125

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  kutga

  félisten

  válasz Intruder2k5 #2123 üzenetére

  100-as. Küldöm a template.config-ot.

  ### Target Vendor/Product (support only Ralink RT3883/MT7620/MT7621)
CONFIG_VENDOR=ASUS
CONFIG_PRODUCT=RT3052

### Target ProductID (board select, max 12 symbols)
CONFIG_FIRMWARE_PRODUCT_ID="RT-N10C1"

############################################################
### Linux kernel configuration
############################################################

### Force MT7620 CPU clock to 600MHz (override Uboot settings)
#CONFIG_FIRMWARE_CPU_600MHZ=y

### Enable MT7620 CPU sleep mode (downclock to 200MHz on idle)
#CONFIG_FIRMWARE_CPU_SLEEP=y

### Kernel driver select for WiFi AP 2.4GHz
### 2.7 = MT7620 v2.7.2.0
### 3.0 = MT7620 v3.0.4.0
CONFIG_FIRMWARE_WIFI2_DRIVER=2.7

### Enable IPv6 support
CONFIG_FIRMWARE_ENABLE_IPV6=y

### Enable USB support
#CONFIG_FIRMWARE_ENABLE_USB=y

### Enable FAT/FAT32 filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_FAT=y

### Enable exFAT (FAT/FAT32 too) filesystem support. ~0.12MB
#CONFIG_FIRMWARE_ENABLE_EXFAT=y

### Enable EXT2 filesystem support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_EXT2=y

### Enable EXT3 filesystem support. ~0.2MB
#CONFIG_FIRMWARE_ENABLE_EXT3=y

### Enable EXT4 (EXT3/2 too) filesystem support. ~0.4MB
#CONFIG_FIRMWARE_ENABLE_EXT4=y

### Enable XFS filesystem support. ~0.6MB
#CONFIG_FIRMWARE_ENABLE_XFS=y

### Enable FUSE (filesystems in userspace) support. ~0.1MB
#CONFIG_FIRMWARE_ENABLE_FUSE=y

### Enable swap files/partitions support. ~0.05MB
#CONFIG_FIRMWARE_ENABLE_SWAP=y

### Include UVC camera modules. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_UVC=y

### Include USB-HID modules. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_HID=y

### Include USB-Serial modules (e.g. pl2303). ~0.03MB
#CONFIG_FIRMWARE_INCLUDE_SERIAL=y

### Include network QoS scheduling modules. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_QOS=y

### Include IMQ module for shapers (a bit of performance degradation). ~0.02MB
#CONFIG_FIRMWARE_INCLUDE_IMQ=y

### Include IFB module for shapers. ~0.03MB
#CONFIG_FIRMWARE_INCLUDE_IFB=y

### Include IPSet utility and kernel modules. ~0.4MB
CONFIG_FIRMWARE_INCLUDE_IPSET=y

### Include NFSv3 server. ~0.6MB
#CONFIG_FIRMWARE_INCLUDE_NFSD=y

### Include NFSv3 client. ~0.5MB
#CONFIG_FIRMWARE_INCLUDE_NFSC=y

### Include CIFS (SMB) client. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_CIFS=y

############################################################
### Userspace configuration
############################################################

### Include WebUI international resources. Increased firmware size
#CONFIG_FIRMWARE_INCLUDE_LANG_BR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_CZ=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DA=y
#CONFIG_FIRMWARE_INCLUDE_LANG_DE=y
#CONFIG_FIRMWARE_INCLUDE_LANG_ES=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FI=y
#CONFIG_FIRMWARE_INCLUDE_LANG_FR=y
#CONFIG_FIRMWARE_INCLUDE_LANG_NO=y
#CONFIG_FIRMWARE_INCLUDE_LANG_PL=y
CONFIG_FIRMWARE_INCLUDE_LANG_RU=y
#CONFIG_FIRMWARE_INCLUDE_LANG_SV=y
#CONFIG_FIRMWARE_INCLUDE_LANG_UK=y

### Include NTFS-3G FUSE driver (instead of Paragon "ufsd"). ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_NTFS_3G=y

### Include LPR printer daemon. ~0.12MB
#CONFIG_FIRMWARE_INCLUDE_LPRD=y

### Include USB-over-Ethernet printer daemon. ~0.05MB
#CONFIG_FIRMWARE_INCLUDE_U2EC=y

### Include "tcpdump" utility. ~0.6MB
#CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y

### Include "hdparm" utility (allow set HDD spindown timeout and APM). ~0.1MB
#CONFIG_FIRMWARE_INCLUDE_HDPARM=y

### Include "parted" utility (allow make GPT partitions). ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_PARTED=y

### Include SMB (and WINS) server. ~1.5MB
#CONFIG_FIRMWARE_INCLUDE_SMBD=y

### Include WINS server only. ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_WINS=y

### Include syslog for SMB and WINS server. ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_SMBD_SYSLOG=y

### Include FTP server. ~0.2MB
#CONFIG_FIRMWARE_INCLUDE_FTPD=y

### Include EAP-TTLS and EAP-PEAP authentication support. openssl ~1.2MB, wpa_supplicant +0.04MB
#CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y

### Include HTTPS support for DDNS client. openssl ~1.2MB
#CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y

### Include HTTPS support. openssl ~1.2MB
#CONFIG_FIRMWARE_INCLUDE_HTTPS=y

### Include sftp-server. openssl ~1.2MB, sftp-server ~0.06MB
#CONFIG_FIRMWARE_INCLUDE_SFTP=y

### Include dropbear SSH. ~0.3MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y

### Make the dropbear symmetrical ciphers and hashes faster. ~0.06MB
CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y

### Include OpenSSH instead of dropbear. openssl ~1.2MB, openssh ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSH=y

### Include OpenVPN. IPv6 required. openssl ~1.2MB, openvpn ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_OPENVPN=y

### Include Elliptic Curves (EC) to openssl library. ~0.1MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y

### Include "openssl" executable for generate certificates. ~0.4MB
#CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y

### Include xUPNPd IPTV mediaserver. ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_XUPNPD=y

### Include Minidlna UPnP mediaserver. ~1.6MB
#CONFIG_FIRMWARE_INCLUDE_MINIDLNA=y

### Include Firefly iTunes mediaserver. ~1.0MB
#CONFIG_FIRMWARE_INCLUDE_FIREFLY=y

### Include ffmpeg 0.11.x instead of 0.6.x for Minidlna and Firefly. ~0.1MB
#CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=y

### Include Transmission torrent. openssl ~1.2MB, transmission ~1.5MB
#CONFIG_FIRMWARE_INCLUDE_TRANSMISSION=y

### Include Transmission-Web-Control (advanced WebUI). ~0.8MB
#CONFIG_FIRMWARE_INCLUDE_TRANSMISSION_WEB_CONTROL=y

### Include Aria2 download manager. openssl ~1.2MB, aria2 ~3.5MB
#CONFIG_FIRMWARE_INCLUDE_ARIA=y

### Include TOR proxy ~2.3MB
#CONFIG_FIRMWARE_INCLUDE_TOR=y

### Include GeoIP database info for TOR proxy ~3MB
#CONFIG_FIRMWARE_INCLUDE_TOR_GEOIP=y

### Include GeoIPv6 database info for TOR proxy ~8.5MB
#CONFIG_FIRMWARE_INCLUDE_TOR_GEOIPV6=y

### Include privoxy proxy ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_PRIVOXY=y

### Include dnscrypt-proxy ~0.3MB
#CONFIG_FIRMWARE_INCLUDE_DNSCRYPT=y

### Include WPAD support
#CONFIG_FIRMWARE_INCLUDE_WPAD=y

### Include compressed memory support
CONFIG_FIRMWARE_INCLUDE_ZRAM=y


############################################################
### Connection settings SSH PROMETHEUS
############################################################
### IP
IPWRT=192.168.1.1
### Login
ROOTWRT=admin
### Password
PWDR="admin"
### SSH Port
ssh_port="22"
############################################################

### Include Aria2 WEB control
#CONFIG_FIRMWARE_INCLUDE_ARIA_WEB_CONTROL=y

### Include alternative L2TP control client RP-L2TP
#CONFIG_FIRMWARE_INCLUDE_RPL2TP=y

• #2124 kutga félisten Intruder2k5 #2123

  Új Válasz 2020-11-11 23:00:57 #2124

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  kutga

  félisten

  válasz Intruder2k5 #2123 üzenetére

  Napközben Ubuntun futtattam a scriptet, de valami loopba került, ugyanazt tekerte órákig, nem történt semmi.

Új hozzászólás Aktív témák