Keresés

Hirdetés

!!! SZERVERLEÁLLÁS, ADATVESZTÉS INFORMÁCIÓK !!!
Talpon vagyunk, köszönjük a sok biztatást! Ha segíteni szeretnél, boldogan ajánljuk Előfizetéseinket!

Új hozzászólás Aktív témák

  • xabolcs

    őstag

    válasz xabolcs #5270 üzenetére

    BS by dchard v1.5

    DSL Annex: A
    ATM VPI: 8
    ATM VCI: 35
    Target SNR: 1%

    root@BS:~ #dmesg && adsl info --stats
    Linux version 2.6.8.1 (root@image) (gcc version 3.4.2) #1 Sun Mar 20 20:32:08 CET 2011

    spi flash init, device_id is 49696
    Serial flash device: name KH25L1605A, id 0xc220, size 2048KB
    96338L-2M-8M prom init
    CPU revision is: 00029010
    Determined physical RAM map:
    memory: 007a0000 @ 00000000 (usable)
    On node 0 totalpages: 1952
    DMA zone: 1952 pages, LIFO batch:1
    Normal zone: 0 pages, LIFO batch:1
    HighMem zone: 0 pages, LIFO batch:1
    Built 1 zonelists
    Kernel command line: root=31:0 init=/etc/preinit console=ttyS0,115200
    brcm mips: enabling icache and dcache...
    Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
    Primary data cache 8kB 2-way, linesize 16 bytes.
    PID hash table entries: 32 (order 5: 256 bytes)
    Using 120.000 MHz high precision timer.
    Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
    Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Memory: 6056k/7808k available (1246k kernel code, 1732k reserved, 190k data, 68k init, 0k highmem)
    KLOB Pool 1 Initialized: 1048576 bytes <0x80600000 ... 0x80700000>
    Calibrating delay loop... 239.20 BogoMIPS
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Checking for 'wait' instruction... unavailable.
    NET: Registered protocol family 16
    Total Flash size: 2048K with 32 sectors
    File system address: 0xbfc10100
    Blk# BlkOff Blks MemLen Partition Name
    0 1408 1 1024 NVRAM
    30 40960 1 24576 Config 2
    31 32768 1 8192 Scratch PAD
    31 40960 1 24576 Config 1
    Can't analyze prologue code at 801462b4
    devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
    Using noop io scheduler
    bcm963xx_mtd driver v1.0
    brcmboard: brcm_board_init entry
    Serial: BCM63XX driver $Revision: 3.00 $
    ttyS0 at MMIO 0xfffe0300 (irq = 10) is a BCM63XX
    NET: Registered protocol family 2
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 512 bind 1024)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 68k freed
    Algorithmics/MIPS FPU Emulator v1.5
    bcmprocfs: module license 'Proprietary' taints kernel.
    Broadcom BCMPROCFS v1.0 initialized
    Broadcom BCM6338A2 Ethernet Network Device v0.3 Apr 27 2009 11:44:40
    Config Internal PHY Through MDIO
    BCM63xx_ENET: 100 MB Full-Duplex (auto-neg)
    eth0: MAC Address: D8:5D:4C:E0:F2:5A
    eth0 Link UP.
    device eth0 entered promiscuous mode
    br0: port 1(eth0) entering learning state
    br0: topology change detected, propagating
    br0: port 1(eth0) entering forwarding state
    blaadd: blaa_detect entry
    adsl: adsl_init entry
    BcmAdsl_Initialize=0xC007F3E8, g_pFnNotifyCallback=0xC0099FE4
    AnnexCParam=0x7FFF7778 AnnexAParam=0x00100980 adsl2=0x00000000
    pSdramPHY=0xA07FFFF8, 0x0 0x0
    AdslCoreHwReset: AdslOemDataAddr = 0xA07F4924
    AnnexCParam=0x7FFF7778 AnnexAParam=0x00100980 adsl2=0x00000000
    dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
    ATM proc init !!!
    device nas_0_8_35 entered promiscuous mode
    br0: port 2(nas_0_8_35) entering learning state
    br0: topology change detected, propagating
    br0: port 2(nas_0_8_35) entering forwarding state
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL G.992 message exchange
    ADSL link down
    ADSL G.994 training
    ADSL G.992 started
    ADSL G.992 channel analysis
    ADSL link up, interleaved, us=123, ds=1272
    ATM Soft SAR: ATM link connected.
    adsl: ADSL driver and PHY status
    Status: Showtime
    Retrain Reason: 8000
    Max: Upstream rate = 124 Kbps, Downstream rate = 4876 Kbps
    Path: 0, Upstream rate = 123 Kbps, Downstream rate = 1272 Kbps

    Link Power State: L0
    Mode: ADSL2
    Trellis: U:ON /D:ON
    Line Status: No Defect
    Training Status: Showtime
    Down Up
    SNR (dB): 0.9 6.2
    Attn(dB): 15.0 11.3
    Pwr(dBm): -20.4 10.3
    ADSL2 framing
    MSGc: 105 22
    B: 2 4
    M: 1 16
    T: 8 2
    R: 6 16
    S: 0.0722 18.7317
    L: 996 41
    D: 256 1
    Counters
    SF: 43811 43939
    SFErr: 0 0
    RS: 38904762 149745
    RSCorr: 201218 3
    RSUnCorr: 0 0

    HEC: 0 0
    OCD: 0 0
    LCD: 0 0
    Total Cells: 2109157 75093166
    Data Cells: 30081 2803162
    Drop Cells: 0
    Bit Errors: 0 1341

    ES: 0 1
    SES: 0 0
    UAS: 298 41506
    AS: 703

    INP: 6.16 1.56
    PER: 16.04 16.39
    delay: 4.62 4.68
    OR: 55.33 13.66

    Bitswap: 1 0

    Total time = 18 min 44 sec
    SF = 43811
    CRC = 0
    LOS = 0
    LOF = 0
    ES = 0
    Latest 1 day time = 18 min 44 sec
    SF = 43811
    CRC = 0
    LOS = 0
    LOF = 0
    ES = 0
    Latest 15 minutes time = 3 min 44 sec
    SF = 14000
    CRC = 0
    LOS = 0
    LOF = 0
    ES = 0
    Previous 15 minutes time = 15 min 0 sec
    SF = 29811
    CRC = 0
    LOS = 0
    LOF = 0
    ES = 0
    Previous 1 day time = 0 sec
    SF = 0
    CRC = 0
    LOS = 0
    LOF = 0
    ES = 0
    Showtime Drop Reason: 8000
    Last Retrain Reason: 8000
    root@BS:~ #

Új hozzászólás Aktív témák