DSL-360T modemet szeretnék frissíteni a Routertech 2.96 verziójára.
A modemet ezzel a verzióval kaptam:
Az előzményeket elolvasva letöltöttem ftp://ftp.dlink.hu/dsl/dsl-360t/driver_software/DSL-360t_fw_revALL_20060220_ALL_eng_20060220.zip fájlt és telepítettem.
A modem most már ezzel a verzióval rendelkezik:
RouterUpgradeCheckert lefuttatva
a routertech.org oldalról letöltöttem a fájlt és megpróbáltam a RouterRepairTool-lal telepíteni.
A http://www.youtube.com/watch?v=-k9V3zL3PJ8 videót megnéztem, de nem tudom hol rontom el a folyamatot.RRT beállítása után elindul a feltöltés
majd az alábbi hibaüzenetet dobja:
A log az alábbiakat tartalmazza:
00:00:000 Running script
00:00:008 Opening connection: 192.168.1.1, 23
00:00:283 ˙ý�˙ý!˙ű�˙ű�
BusyBox on (none) login:
00:00:483 Password:
00:00:684 BusyBox v0.61.pre (2006.02.20-04:32+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#
00:00:685 Delay for 1 second(s)
00:01:685 End of script
00:00:001 Running script
00:00:009 Opening connection: 192.168.1.1, 21
00:00:016 220 ADAM2 FTP Server ready.
00:00:024 >USER adam2
00:00:025 331 Password required for adam2.
00:00:033 >PASS adam2
00:00:034 230 User adam2 successfully logged in.
00:00:042 >SETENV mtd0,0x9008A000,0x901F0000
00:00:046 200 SETENV command successful
00:00:054 >SETENV mtd1,0x90010090,0x9008A000
00:00:057 200 SETENV command successful
00:00:065 >SETENV mtd2,0x90000000,0x90010000
00:00:068 200 SETENV command successful
00:00:076 >SETENV mtd3,0x901F0000,0x90200000
00:00:080 200 SETENV command successful
00:00:088 >SETENV mtd4,0x90010000,0x901F0000
00:00:091 200 SETENV command successful
00:00:099 >TYPE I
00:00:100 200 Type set to I.
00:00:109 >MEDIA FLSH
00:00:110 200 Media set to FLSH.
00:00:124 Data socket status: OK Created socket: 656 : state = 0
00:00:124 Data socket status: Winsock buffer size for sends: 8192 : state = 0
00:00:124 Data socket status: Winsock buffer size for receives: 8192 : state = 0
00:00:131 Data socket status: OK Bind HOST: 192.168.1.2 PORT: 5000 : state = 0
00:00:133 Data socket status: STATE: sckListening : state = 2
00:00:133 Listening on port 5000 for active mode file transfer
00:00:133 >PORT 192,168,1,2,19,136
00:00:134 200 Port command successful.
00:00:142 >STOR single mtd4
00:00:150 Erasing mtd4
00:00:161 Data socket status: FD_ACCEPT 656 : state = 2
00:00:162 Data socket status: OK Accepted socket: 636 : state = 2
00:00:162 Processing winsock data connection request -> accepting for file send.
00:18:741 150 Opening BINARY mode data connection for file transfer.
00:18:749 Sending combined image file...
00:18:778 Sending file: c:\RouterTech_3.6.0D_20110502_2.96_AR7RD-1Port_Adam2_firmware.AnnexB.upgrade.img
00:18:778 Files is 1912840 byte(s) long
00:43:638 File piecemeal send complete [1912840 byte(s)]
00:43:726 226 Transfer complete.
00:43:734 Delay for 5 second(s)
00:48:743 >REBOOT
00:48:744 221-Thank you for using the FTP service on ADAM2.
221 Goodbye.
00:48:744 End of script
00:48:744 Data socket status: STATE: sckClosing : state = 8
00:48:744 Data socket status: OK Destroyed socket 656 : state = 8
00:48:745 Data socket status: STATE: sckClosed : state = 0
00:48:745 Closed connection.
00:00:000 Running script
00:00:008 Opening connection: 192.168.1.1, 23
00:00:954 ˙ý�˙ý!˙ű�˙ű�(none) login:
00:01:227 Password:
00:04:511 Incorrect username and/or password.
00:04:511 Login incorrect
RouterTech.AR7RD login:
00:04:512 Closed connection.
00:27:488 Closed connection.
Could not log in to router - please check that the username and password are correct.

Az RRT-ben melyik név/jelszó párost kell megadni, mert a 2006-os programba admin/admin mig a Routertechnél Admin/Admin van megadva.