Hirdetés

  2. Fórumok
  3. Adattárolás
  4. HDD probléma (nem adatmentés)
  5. (kiemelt téma)
Keresés

Új hozzászólás Aktív témák

  • #49856 felora:) tag
    Új Válasz #49856
    Új hozzászólás
    Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
    Privát üzenet küldése

    felora:)

    tag

    sziasztok!

    Van egy Kontron KTQM87 alaplapom, azon a SATA0 porton egy Samsung 860EVO 250gb -os SSD van, ami elvileg SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) megfelelően üzemel.

    Amivel a problémám van, hogy van a SATA2 és SATA3 porton RAID0 -ba 1-1 db. WD winyó (WDC WD3000FYYZ-05UL1B0). ezeknek az átviteli sebessége valamiért "csak" 3 Gb/s a smartctl szerint.
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Én nem találtam az alaplap leírásában erre vonatkozóan beállítási lehetőséget. Az alaplap és az összes rákötött eszköz támogatja a SATA3 szabványt... Valami ötlet? :R

  • #49669 felora:) tag
    Új Válasz #49669
    Új hozzászólás
    Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
    Privát üzenet küldése

    felora:)

    tag

    sziasztok! a következő problémám lenne, ami igazából nem is probléma. :))

    van egy raid0 tömböm, 2x3tb WDC WD3000FYYZ-05UL1B0. Szeretném, ha ez a 2 winyó, ha nincs semmi feladata, akkor sem kapcsolna ki. hdparm-al a következő utasítást kiadtam nekik:

    hdparm -B 255 /dev/sdb
    hdparm -B 255 /dev/sdc

    hdparm -S 0 /dev/sdb
    hdparm -S 0 /dev/sdc

    elvileg ezt nyugtázta is a gép,

    [root@wrouter ~]# hdparm -I /dev/sdb

    /dev/sdb:

    ATA device, with non-removable media
    Model Number: WDC WD3000FYYZ-05UL1B0
    Serial Number: WD-WMC130246224
    Firmware Revision: 00.0NS00
    Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
    Standards:
    Supported: 8 7 6 5
    Likely used: 8
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    --
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 268435455
    LBA48 user addressable sectors: 5860533168
    Logical/Physical Sector size: 512 bytes
    device size with M = 1024*1024: 2861588 MBytes
    device size with M = 1000*1000: 3000592 MBytes (3000 GB)
    cache/buffer size = unknown
    Nominal Media Rotation Rate: 7200
    Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, with device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 0
    Advanced power management level: disabled
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    * SMART feature set
    Security Mode feature set
    * Power Management feature set
    Write cache
    * Look-ahead
    * Host Protected Area feature set
    * WRITE_BUFFER command
    * READ_BUFFER command
    * NOP cmd
    * DOWNLOAD_MICROCODE
    Advanced Power Management feature set
    Power-Up In Standby feature set
    * SET_FEATURES required to spinup after power up
    SET_MAX security extension
    * 48-bit Address feature set
    * Mandatory FLUSH_CACHE
    * FLUSH_CACHE_EXT
    * SMART error logging
    * SMART self-test
    * General Purpose Logging feature set
    * WRITE_{DMA|MULTIPLE}_FUA_EXT
    * 64-bit World wide name
    * IDLE_IMMEDIATE with UNLOAD
    * WRITE_UNCORRECTABLE_EXT command
    * {READ,WRITE}_DMA_EXT_GPL commands
    * Segmented DOWNLOAD_MICROCODE
    unknown 119[7]
    * Gen1 signaling speed (1.5Gb/s)
    * Gen2 signaling speed (3.0Gb/s)
    * Gen3 signaling speed (6.0Gb/s)
    * Native Command Queueing (NCQ)
    * Phy event counters
    * Idle-Unload when NCQ is active
    * NCQ priority information
    * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
    * DMA Setup Auto-Activate optimization
    * Software settings preservation
    * SMART Command Transport (SCT) feature set
    * SCT Write Same (AC2)
    * SCT Error Recovery Control (AC3)
    * SCT Features Control (AC4)
    * SCT Data Tables (AC5)
    unknown 206[7]
    unknown 206[12] (vendor specific)
    unknown 206[13] (vendor specific)
    unknown 206[14] (vendor specific)
    Security:
    Master password revision code = 65534
    supported
    not enabled
    not locked
    frozen
    not expired: security count
    supported: enhanced erase
    368min for SECURITY ERASE UNIT. 368min for ENHANCED SECURITY ERASE UNIT.
    Logical Unit WWN Device Identifier: 50014ee058ee3b24
    NAA : 5
    IEEE OUI : 0014ee
    Unique ID : 058ee3b24
    Checksum: correct
    [root@wrouter ~]# hdparm -I /dev/sdc

    /dev/sdc:

    ATA device, with non-removable media
    Model Number: WDC WD3000FYYZ-05UL1B0
    Serial Number: WD-WMC130245945
    Firmware Revision: 00.0NS00
    Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
    Standards:
    Supported: 8 7 6 5
    Likely used: 8
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    --
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 268435455
    LBA48 user addressable sectors: 5860533168
    Logical/Physical Sector size: 512 bytes
    device size with M = 1024*1024: 2861588 MBytes
    device size with M = 1000*1000: 3000592 MBytes (3000 GB)
    cache/buffer size = unknown
    Nominal Media Rotation Rate: 7200
    Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, with device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 0
    Advanced power management level: disabled
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    * SMART feature set
    Security Mode feature set
    * Power Management feature set
    Write cache
    * Look-ahead
    * Host Protected Area feature set
    * WRITE_BUFFER command
    * READ_BUFFER command
    * NOP cmd
    * DOWNLOAD_MICROCODE
    Advanced Power Management feature set
    Power-Up In Standby feature set
    * SET_FEATURES required to spinup after power up
    SET_MAX security extension
    * 48-bit Address feature set
    * Mandatory FLUSH_CACHE
    * FLUSH_CACHE_EXT
    * SMART error logging
    * SMART self-test
    * General Purpose Logging feature set
    * WRITE_{DMA|MULTIPLE}_FUA_EXT
    * 64-bit World wide name
    * IDLE_IMMEDIATE with UNLOAD
    * WRITE_UNCORRECTABLE_EXT command
    * {READ,WRITE}_DMA_EXT_GPL commands
    * Segmented DOWNLOAD_MICROCODE
    unknown 119[7]
    * Gen1 signaling speed (1.5Gb/s)
    * Gen2 signaling speed (3.0Gb/s)
    * Gen3 signaling speed (6.0Gb/s)
    * Native Command Queueing (NCQ)
    * Phy event counters
    * Idle-Unload when NCQ is active
    * NCQ priority information
    * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
    * DMA Setup Auto-Activate optimization
    * Software settings preservation
    * SMART Command Transport (SCT) feature set
    * SCT Write Same (AC2)
    * SCT Error Recovery Control (AC3)
    * SCT Features Control (AC4)
    * SCT Data Tables (AC5)
    unknown 206[7]
    unknown 206[12] (vendor specific)
    unknown 206[13] (vendor specific)
    unknown 206[14] (vendor specific)
    Security:
    Master password revision code = 65534
    supported
    not enabled
    not locked
    frozen
    not expired: security count
    supported: enhanced erase
    370min for SECURITY ERASE UNIT. 370min for ENHANCED SECURITY ERASE UNIT.
    Logical Unit WWN Device Identifier: 50014ee0ae43d77e
    NAA : 5
    IEEE OUI : 0014ee
    Unique ID : 0ae43d77e

    mégis leállnak bizonyos inaktív idő után. hogyan tudnám orvosolni? :R

Új hozzászólás Aktív témák