Új hozzászólás Aktív témák

• #41827 kkdesign senior tag ubyegon2 #41826

  Új Válasz 2015-11-08 15:11:19 #41827

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  kkdesign

  senior tag

  válasz ubyegon2 #41826 üzenetére

  feltettem a toolst, le is futott a parancs, nem látok hibára utaló jelet

  ezek után van akkor még más dolgom?

  smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.19.0-32-generic] (local build)
  Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  
  === START OF INFORMATION SECTION ===
  Device Model: Samsung SSD 840 EVO 120GB
  Serial Number: S1D5NSAF645850N
  LU WWN Device Id: 5 002538 8a04ca1bf
  Firmware Version: EXT0DB6Q
  User Capacity: 120.034.123.776 bytes [120 GB]
  Sector Size: 512 bytes logical/physical
  Rotation Rate: Solid State Device
  Device is: Not in smartctl database [for details use: -P showall]
  ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
  SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  Local Time is: Sun Nov 8 15:10:10 2015 CET
  SMART support is: Available - device has SMART capability.
  SMART support is: Enabled
  
  === START OF READ SMART DATA SECTION ===
  SMART overall-health self-assessment test result: PASSED
  
  General SMART Values:
  Offline data collection status: (0x00) Offline data collection activity
  was never started.
  Auto Offline Data Collection: Disabled.
  Self-test execution status: ( 0) The previous self-test routine completed
  without error or no self-test has ever
  been run.
  Total time to complete Offline
  data collection: ( 4200) seconds.
  Offline data collection
  capabilities: (0x53) SMART execute Offline immediate.
  Auto Offline data collection on/off support.
  Suspend Offline collection upon new
  command.
  No Offline surface scan supported.
  Self-test supported.
  No Conveyance Self-test supported.
  Selective Self-test supported.
  SMART capabilities: (0x0003) Saves SMART data before entering
  power-saving mode.
  Supports SMART auto save timer.
  Error logging capability: (0x01) Error logging supported.
  General Purpose Logging supported.
  Short self-test routine
  recommended polling time: ( 2) minutes.
  Extended self-test routine
  recommended polling time: ( 70) minutes.
  SCT capabilities: (0x003d) SCT Status supported.
  SCT Error Recovery Control supported.
  SCT Feature Control supported.
  SCT Data Table supported.
  
  SMART Attributes Data Structure revision number: 1
  Vendor Specific SMART Attributes with Thresholds:
  ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 3802
  12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 865
  177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 23
  179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
  181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
  182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
  183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
  187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  190 Airflow_Temperature_Cel 0x0032 071 039 000 Old_age Always - 29
  195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
  199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
  235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 73
  241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 7493192964
  
  SMART Error Log Version: 1
  No Errors Logged
  
  SMART Self-test log structure revision number 1
  No self-tests have been logged. [To run self-tests, use: smartctl -t]
  
  
  SMART Selective self-test log data structure revision number 1
  SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  1 0 0 Not_testing
  2 0 0 Not_testing
  3 0 0 Not_testing
  4 0 0 Not_testing
  5 0 0 Not_testing
  Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
  If Selective self-test is pending on power-up, resume after 0 minute delay.

Új hozzászólás Aktív témák