Új hozzászólás Aktív témák

• #18897 mszl aktív tag mszl #18887

  Új Válasz 2014-01-02 20:17:26 #18897

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  mszl

  aktív tag

  válasz mszl #18887 üzenetére

  Sziasztok!

  Még mindig nem jutottam sokkal előrébb, de már teljesen más hibaüzenetet ír ki, a script header-jére panaszkodik, pedig szerintem jó. A script működik! de nem tudom az init.d-be bevarázsolni

  Most ezt kapom:
  root@UTORRENT-SQUEEZEBOXSERVER:/etc/init.d# sudo update-rc.d squeezelite-usb defaults
  update-rc.d: using dependency based boot sequencing
  Can't exec "insserv": Nincs ilyen fájl vagy könyvtár at /usr/sbin/update-rc.d line 406.
  update-rc.d: error: insserv rejected the script header
  root@UTORRENT-SQUEEZEBOXSERVER:/etc/init.d#

  Valakinek esetleg valami ötlete???

  #!/bin/sh
  ### BEGIN INIT INFO
  # Provides: Squeezelite
  # Required-Start:
  # Required-Stop:
  # Should-Start:
  # Default-Start: 2 3 4 5
  # Default-Stop: 0 1 6
  # Short-Description: Squeezelite
  # Description: Light weight streaming audio player for Logitech's Squeezebox audio server
  # See: http://code.google.com/p/squeezelite/
  # and: http://forums.slimdevices.com/showthread.php?97046-Announce-Squeezelite-a-small-headless-squeezeplay-emulator-for-linux-%28alsa-only%29
  ### END INIT INFO
  
  # See for full install instructions: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=38&t=25778
  # Uninstall Instructions : update-rc.d squeezelitehf remove
  
  # PATH should only include /usr/* if it runs after the mountnfs.sh script
  PATH=/sbin:/usr/sbin:/bin:/usr/bin
  DESC="SqueezeboxPlayer 02 on ASROCK A330GC USB SOUNDCARD"
  NAME=squeezelite
  DAEMON=/usr/bin/$NAME
  PIDFILE=/var/run/$NAME.pid
  SCRIPTNAME=/etc/init.d/squeezelite-usb
  
  
  # get mac address from wifi adapter or on board network card
  #SL_MAC_ADDRESS=$(ifconfig | grep 'wlan0' | tr -s ' ' | cut -d ' ' -f5)
  #[ -n "$SL_MAC_ADDRESS" ] || SL_MAC_ADDRESS=$(ifconfig | grep 'eth0' | tr -s ' ' | cut -d ' ' -f5)
  # get hostname which can be used as hostname
  # watch out, on raspbian, you can only use letters, numbers and hyphens (minus sign, "-"). And nothing else!
  #SL_NAME=$(hostname -s)
  #[ -n "$SL_NAME" ] || SL_NAME=SqueezelitePlayer
  # Get squeezelite version, for logging and update procedure
  
  SL_VERSION=$(sudo $DAEMON -t | grep "Squeezelite v" | tr -s ' ' | cut -d ',' -f1 | cut -d ' ' -f2)
  
  # =========================================================
  # CHANGE THESE VALUES IF NEEDED
  
  # the name for the squeezelite player (-n option):
  SL_NAME="SqueezePlayer02-USB"
  
  # Set the soundcard
  SL_SOUNDCARD="hw:CARD=Set,DEV=0"
  
  # Uncomment the next line (remove hash) if you want to change the mac address (-m option):
  SL_MAC_ADDRESS="AA:AA:AA:AA:01:02"
  # Note: when left commented squeezelite will use the mac address of your ethernet card or
  # wifi adapter, which is what you want.
  # If you change it to something different, it will give problems is you use mysqueezebox.com .
  
  # Uncomment the next line (remove hash) if you want to point squeezelite
  # at the IP address of your squeezebox server (-s option). And change the IP address of course..
  SB_SERVER_IP="192.168.1.6"
  # Note: if this is not set, Squeezelite will use auto discovery to find
  # the LMS server, which works fine too.
  
  # Uncomment the next line (remove hash) if you want to set ALSA parameters (-a option, set to buffer size 80):
  #SL_ALSA_PARAMS="80"
  
  # Uncomment the next TWO lines to turn on logging (-f and -d option):
  SL_LOGFILE=/var/log/squeezelite-usb.log
  SL_LOGLEVEL="all=info"
  
  
  # =========================================================
  
  
  # Exit if the package is not installed
  [ -x "$DAEMON" ] || exit 0
  
  # Read configuration variable file if it is present
  [ -r /etc/default/$NAME ] && . /etc/default/$NAME
  
  # Load the VERBOSE setting and other rcS variables
  . /lib/init/vars.sh
  
  # Define LSB log_* functions.
  # Depend on lsb-base (>= 3.2-14) to ensure that this file is present
  # and status_of_proc is working.
  . /lib/lsb/init-functions
  
  #
  # Function that starts the daemon/service
  #
  do_start()
  {
  
  # Return
  # 0 if daemon has been started
  # 1 if daemon was already running
  # 2 if daemon could not be started
  start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null || return 1
  
  
  DAEMON_ARGS=""
  
  # add souncard setting if set
  if [ ! -z "$SL_SOUNDCARD" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -o ${SL_SOUNDCARD}"
  fi
  
  # add squeezelite name if set
  if [ ! -z "$SL_NAME" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -n ${SL_NAME}"
  fi
  
  # add mac address if set
  if [ ! -z "$SL_MAC_ADDRESS" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -m ${SL_MAC_ADDRESS}"
  fi
  
  # add squeezebox server ip address if set
  if [ ! -z "$SB_SERVER_IP" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -s ${SB_SERVER_IP}"
  fi
  
  # set ALSA parameters if set
  if [ ! -z "$SL_ALSA_PARAMS" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -a ${SL_ALSA_PARAMS}"
  fi
  
  # add logging if set
  if [ ! -z "$SL_LOGFILE" ]; then
  if [ -f ${SL_LOGFILE} ]; then
  rm ${SL_LOGFILE}
  fi
  DAEMON_ARGS="${DAEMON_ARGS} -f ${SL_LOGFILE}"
  fi
  
  # add log level setting if set
  if [ ! -z "$SL_LOGLEVEL" ]; then
  DAEMON_ARGS="${DAEMON_ARGS} -d ${SL_LOGLEVEL}"
  fi
  
  start-stop-daemon --start --quiet --make-pidfile --pidfile $PIDFILE --background --exec $DAEMON -- $DAEMON_ARGS || return 2
  
  }
  
  #
  # Function that stops the daemon/service
  #
  do_stop()
  {
  # Return
  # 0 if daemon has been stopped
  # 1 if daemon was already stopped
  # 2 if daemon could not be stopped
  # other if a failure occurred
  start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --exec $DAEMON
  RETVAL="$?"
  [ "$RETVAL" = 2 ] && return 2
  # Wait for children to finish too if this is a daemon that forks
  # and if the daemon is only ever run from this initscript.
  # If the above conditions are not satisfied then add some other code
  # that waits for the process to drop all resources that could be
  # needed by services started subsequently. A last resort is to
  # sleep for some time.
  start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
  [ "$?" = 2 ] && return 2
  # Many daemons don't delete their pidfiles when they exit.
  rm -f $PIDFILE
  return "$RETVAL"
  }
  
  #
  # Function that updates squeezelite
  #
  do_update()
  {
  wget -P /tmp http://squeezelite.googlecode.com/files/squeezelite-armv6hf
  sudo cp /usr/bin/squeezelite-armv6hf /tmp/squeezelite-armv6hf.old
  sudo mv /tmp/squeezelite-armv6hf /usr/bin
  sudo chmod u+x /usr/bin/squeezelite-armv6hf
  # get the new version
  SL_VERSION=$(sudo $DAEMON -t | grep "Squeezelite v" | tr -s ' ' | cut -d ',' -f1 | cut -d ' ' -f2)
  }
  
  #
  # Function that sends a SIGHUP to the daemon/service
  #
  do_reload() {
  #
  # If the daemon can reload its configuration without
  # restarting (for example, when it is sent a SIGHUP),
  # then implement that here.
  #
  start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
  return 0
  }
  
  case "$1" in
  start)
  [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
  do_start
  case "$?" in
  0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
  2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
  esac
  ;;
  stop)
  [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
  do_stop
  case "$?" in
  0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
  2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
  esac
  ;;
  update)
  echo "Update Squeezelite $SL_VERSION to latest version"
  do_stop
  do_update
  do_start
  echo "Squeezelite updated to version: $SL_VERSION"
  ;;
  status)
  status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
  ;;
  #reload|force-reload)
  #
  # If do_reload() is not implemented then leave this commented out
  # and leave 'force-reload' as an alias for 'restart'.
  #
  #log_daemon_msg "Reloading $DESC" "$NAME"
  #do_reload
  #log_end_msg $?
  #;;
  restart|force-reload)
  #
  # If the "reload" option is implemented then remove the
  # 'force-reload' alias
  #
  log_daemon_msg "Restarting $DESC" "$NAME"
  do_stop
  case "$?" in
  0|1)
  do_start
  case "$?" in
  0) log_end_msg 0 ;;
  1) log_end_msg 1 ;; # Old process is still running
  *) log_end_msg 1 ;; # Failed to start
  esac
  ;;
  *)
  # Failed to stop
  log_end_msg 1
  ;;
  esac
  ;;
  *)
  #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
  echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
  exit 3
  ;;
  esac
  
  :

• #18888 Jester01 veterán mszl #18887

  Új Válasz 2014-01-02 14:11:05 #18888

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Jester01

  veterán

  válasz mszl #18887 üzenetére

  Ez úgy hangzik mintha nem lenne beállítva a megfelelő PATH.

Új hozzászólás Aktív témák