Új hozzászólás Aktív témák

• #15 eddie303 őstag

  Új Válasz 2004-07-03 17:57:09 #15

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  eddie303

  őstag

  Természetesen, íme:
  
  Linux version 2.6.7 (root@localhost) (gcc version 3.3.2) #7 Sat Jul 3 18:28:19 CEST 2004
  BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  255MB LOWMEM available.
  On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
  DMI 2.2 present.
  ACPI: RSDP (v000 KT266A ) @ 0x000f73f0
  ACPI: RSDT (v001 KT266A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
  ACPI: FADT (v001 KT266A AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
  ACPI: DSDT (v001 KT266A AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
  ACPI: PM-Timer IO Port: 0x4008
  Built 1 zonelists
  Kernel command line: root=/dev/ide/host0/bus0/target0/lun0/part2
  Local APIC disabled by BIOS -- reenabling.
  Found and enabled local APIC!
  Initializing CPU#0
  PID hash table entries: 1024 (order 10: 8192 bytes)
  Detected 1300.675 MHz processor.
  Using pmtmr for high-res timesource
  Console: colour VGA+ 80x25
  Memory: 254956k/262080k available (2694k kernel code, 6384k reserved, 1091k data, 192k init, 0k highmem)
  Checking if this processor honours the WP bit even in supervisor mode... Ok.
  Calibrating delay loop... 2572.28 BogoMIPS
  Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
  CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
  CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  CPU: L2 Cache: 64K (64 bytes/line)
  CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
  Intel machine check architecture supported.
  Intel machine check reporting enabled on CPU#0.
  CPU: AMD Duron(tm) processor stepping 01
  Enabling fast FPU save and restore... done.
  Enabling unmasked SIMD FPU exception support... done.
  Checking 'hlt' instruction... OK.
  enabled ExtINT on CPU#0
  ESR value before enabling vector: 00000000
  ESR value after enabling vector: 00000000
  Using local APIC timer interrupts.
  calibrating APIC timer ...
  ..... CPU clock speed is 1299.0848 MHz.
  ..... host bus clock speed is 199.0976 MHz.
  NET: Registered protocol family 16
  spurious 8259A interrupt: IRQ7.
  PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=1
  PCI: Using configuration type 1
  mtrr: v2.0 (20020519)
  ACPI: Subsystem revision 20040326
  ACPI: IRQ9 SCI: Level Trigger.
  ACPI: Interpreter enabled
  ACPI: Using PIC for interrupt routing
  ACPI: PCI Root Bridge [PCI0] (00:00)
  PCI: Probing PCI hardware (bus 00)
  ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
  ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
  ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
  SCSI subsystem initialized
  usbcore: registered new driver usbfs
  usbcore: registered new driver hub
  ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  PCI: Using ACPI for IRQ routing
  vesafb: probe of vesafb0 failed with error -6
  vga16fb: initializing
  vga16fb: mapped to 0xc00a0000
  fb0: VGA16 VGA frame buffer device
  Machine check exception polling timer started.
  apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  apm: overridden by ACPI.
  VFS: Disk quotas dquot_6.5.1
  Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
  devfs: boot_options: 0x1
  NTFS driver 2.1.14 [Flags: R/W].
  udf: registering filesystem
  Initializing Cryptographic API
  ACPI: Power Button (FF) [PWRF]
  ACPI: Sleep Button (CM) [SLPB]
  ACPI: Fan [FAN] (on)
  ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
  ACPI: Thermal Zone [THRM] (42 C)
  Console: switching to colour frame buffer device 80x30
  Non-volatile memory driver v1.2
  Linux agpgart interface v0.100 (c) Dave Jones
  agpgart: Detected VIA P4X266 chipset
  agpgart: Maximum main memory to use for agp memory: 203M
  agpgart: AGP aperture is 64M @ 0xe0000000
  Using anticipatory io scheduler
  Floppy drive(s): fd0 is 1.44M
  FDC 0 is a post-1991 82077
  RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
  Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  VP_IDE: IDE controller at PCI slot 0000:00:11.1
  VP_IDE: chipset revision 6
  VP_IDE: not 100% native mode: will probe irqs later
  VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
  ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hdaMA, hdb:pio
  ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdcMA, hddMA
  hda: ST360020A, ATA DISK drive
  ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  hdc: SAMSUNG CDRW/DVD SM-348B, ATAPI CD/DVD-ROM drive
  hdd: 4X4X32, ATAPI CD/DVD-ROM drive
  ide1 at 0x170-0x177,0x376 on irq 15
  hda: max request size: 128KiB
  hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
  hdc: ATAPI 48X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
  Uniform CD-ROM driver Revision: 3.20
  hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
  mice: PS/2 mouse device common for all mice
  serio: i8042 AUX port at 0x60,0x64 irq 12
  input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
  serio: i8042 KBD port at 0x60,0x64 irq 1
  input: AT Translated Set 2 keyboard on isa0060/serio0
  i2c /dev entries driver
  Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
  ALSA device list:
  No soundcards found.
  NET: Registered protocol family 2
  IP: routing cache hash table of 2048 buckets, 16Kbytes
  TCP: Hash tables configured (established 16384 bind 32768)
  NET: Registered protocol family 1
  NET: Registered protocol family 17
  NET: Registered protocol family 4
  PM: Reading pmdisk image.
  PM: Resume from disk failed.
  ACPI: (supports S0 S1 S4 S5)
  kjournald starting. Commit interval 5 seconds
  EXT3-fs: mounted filesystem with ordered data mode.
  VFS: Mounted root (ext3 filesystem) readonly.
  Mounted devfs on /dev
  Freeing unused kernel memory: 192k freed
  EXT3 FS on hda2, internal journal
  Linux video capture interface: v1.00
  bttv: driver version 0.9.14 loaded
  bttv: using 4 buffers with 2080k (520 pages) each for capture
  bttv: Bt8xx card found (0).
  bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xe9101000
  bttv0: using: Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [card=78,insmod option]
  bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
  bttv0: using tuner=5
  bttv0: i2c: checking for TDA9875 @ 0xb0... not found
  bttv0: i2c: checking for TDA7432 @ 0x8a... not found
  tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
  tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw]bttv0: registered device video0
  bttv0: registered device vbi0
  bttv0: registered device radio0
  bttv0: PLL: 28636363 => 35468950 .. ok
  eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
  eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
  eth0: OEM i82557/i82558 10/100 Ethernet, 00:90:27:A08E, IRQ 11.
  Board assembly 734938-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
  lp: driver loaded but no devices found
  ieee1394: Initialized config rom entry `ip1394'
  libata version 1.02 loaded.
  NTFS-fs warning (device hda1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
  NTFS volume version 3.1.
  FAT: bogus number of reserved sectors
  VFS: Can't find a valid FAT filesystem on dev hda3.
  FAT: bogus number of reserved sectors
  VFS: Can't find a valid FAT filesystem on dev hda3.
  NTFS-fs warning (device hda6): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
  NTFS volume version 3.1.
  NET: Registered protocol family 10
  IPv6 over IPv4 tunneling driver
  eth0: no IPv6 routers present
  nvidia: module license 'NVIDIA' taints kernel.
  NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6106 Wed Jun 23 08:14:01 PDT 2004
  agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
  agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
  agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
  agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
  agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
  atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
  atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
  

Új hozzászólás Aktív témák