Eddig jutottam.

Model: Cisco EPC3212
Vendor: Cisco
Hardware Revision: 1.0
MAC Address: 54:d4:6f:11:e7:07
Bootloader Revision: 2.3.0_R1
Current Software Revision: EPC3212-ESIP-12-v302r125531-110517c_upc
Firmware Name: e3200-ESIP-12-v302r125531-110517c_upc.bin
Firmware Build Time: May 17 16:29:03 2011
Cable Modem Status: Operational
Wireless Network:

Cable Modem State

DOCSIS Downstream Scanning: Completed
DOCSIS Ranging: Completed
DOCSIS DHCP: Completed
DOCSIS TFTP: Completed
DOCSIS Data Reg Complete: Completed
DOCSIS Privacy: Enabled

Downstream Channels

Power Level: Signal to Noise Ratio:
Channel 1: 7.5 dBmV 40.3 dB
Channel 2: 7.6 dBmV 39.4 dB
Channel 3: 7.9 dBmV 40.0 dB
Channel 4: 7.8 dBmV 40.1 dB
Channel 5: 7.8 dBmV 40.0 dB
Channel 6: 8.2 dBmV 40.3 dB
Channel 7: 8.1 dBmV 40.3 dB
Channel 8: 7.5 dBmV 40.1 dB

Upstream Channels

Power Level:
Channel 1: 41.5 dBmV
Channel 2: 41.5 dBmV
Channel 3: 41.5 dBmV
Channel 4: 41.5 dBmV

Telephone 1 és 2 van rajta meg, enthernet, power, cable, reboot gomb meg egy USB feliratú csatlakozó ami viszont nem USB mert sokkal vaskosabb.