Új hozzászólás Aktív témák

• #52 twollah nagyúr botye #51

  Új Válasz 2003-07-09 07:03:52 #52

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  

  twollah

  nagyúr

  válasz botye #51 üzenetére

  Az előző boot CD már megvan csak a kernelt, és pár beállítást kéne megváltoztatni.
  
  AmigaOS alatt a lenti doksi alapján próbáltam elkészíteni a boot CDt, de kegyetlenül elszúrtam vmit.
  Ezért próbálkozok most W!n alatt hátha több sikerélményem lesz.
  
  És most jöjjön az ominózus dokumentum:
  
  How to make an updated bootable AMIthlon CD.
  by Lorence Lombardo, (C) Copyright 2003
  
  The reason why you would want to update your existing Amithlon CD is
  that the original kernel may not support your current or future
  hardware.
  
  The following is only my suggested way of doing it.
  You will need the following software items:-
  1. A new kernel for AMIthlon. You can download the file newkernel.lha
  from the aminet.
  2. Some CD imaging software. I used mkisofs, which you can download
  from the aminet archive mkisofs-2.0-bin.lha .
  
  Now these are the steps I took to update my CD.
  
  1. Copy the contents of your Amithlon CD preferably to an empty
  partition on your hard drive. For this explanation we will use
  SDH2: for the empty partition name. Once all of the CD contents is
  copied , I suggest you do a soft reset so that your `Disk.info'
  icon is updated on that partition.
  
  2. Extract the archive newkernel.lha and place your new kernel
  , `new_emubox.gz' in the `isolinux' directory on the SDH2:
  partition.
  
  3. With your favorite text editor edit the files isolinux.cfg, small,
  and amithlon from the `isolinux' directory, which is on SDH2:.
  Replace the word `emubox.gz' with `new_emubox.gz'. You will also
  need to add 200 to the ''leavepages=xxxx'' parameter. Since this
  kernel is a little bit bigger than the old one.
  
  4. Now extract mkisofs-2.0-bin.lha and place the executable file
  `mkisofs' to somewhere like RAM:. The output ISO name I used was
  `SDH3:AMIthlon.iso'. You will need to edit the script file which I
  have provided in this archive called `mkis.bat' to suite your
  partition device names.
  
  5. Open a shell and execute the script `mkis.bat'. Hopefully you
  would have built a successful CD-ROM ISO image. Now all you have to
  do is burn the image to CD.
  
  The End...
  CYA...!!!!
  
  

Új hozzászólás Aktív témák